 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| HI-8422 April 2002 16-Channel Discrete-to-Digital Interface Sensing 28 Volt / Open and Open / Ground Signals FEATURES ! ! ! ! ! ! 8 independent 28 Volt / Open sensing channels 8 independent Open / Ground sensing channels 5.0 V single supply operation DESCRIPTION The HI-8422 is a sixteen channel discrete-to-digital interface device. The device has eight channels designed to sense 28 V / Open signals and eight channels that sense Open / Ground signals. Data is multiplexed from each bank of sensors to an eight bit digital databus. Mixed-signal CMOS technology is used to provide superior low-power performance. The device outputs are CMOS / TTL compatible and may be disabled (tri-state) using the CE and OE pins. The HI-8422 is offered in a small footprint 32-pin Plastic Quad Flat Package (PQFP). Please contact the Holt sales department for other packaging options. Sense inputs are internally lightning protected per DO-160D level 3 Military processing options available IN CE 0 0 OE 0 0 PIN CONFIGURATION 31 - 28VIN2 29 - 28VIN1 32 - 0VIN2 30 - 0VIN1 27 - GND 28 - N/C 26 - D1 25 - D2 28V Inputs Open 28 Volts X X X X 0V Inputs X X Open Ground X X A0 1 1 0 0 X X IM Output 1 0 0 0 0 1 X 1 High Z High Z FUNCTION TABLE 28VIN3 - 1 0VIN3 - 2 0VIN4 - 4 28VIN5 - 5 0VIN5 - 6 28VIN6 - 7 0VIN6 - 8 28VIN4 - 3 EL 0 0 PR 1 X 0VIN7 - 10 CE - 12 A0 - 13 VDD - 14 D8 - 15 32 Pin TQFP package (DS8422 Rev. B) HOLT INTEGRATED CIRCUITS www.holtic.com 28VIN7 - 9 OE - 11 D7 - 16 AR Y Low power CMOS technology 24 - N/C 23 - D3 22 - N/C 21 - 0VIN8 20 - 28VIN8 19 - D4 18 - D5 17 - D6 04/02 HI-8422 PIN DESCRIPTIONS PIN 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 SYMBOL 28VIN3 0VIN3 28VIN4 0VIN4 28VIN5 0VIN5 28VIN6 0VIN6 28VIN7 0VIN7 OE CE A0 VDD D8 D7 D6 D5 D4 28VIN8 0VIN8 N/C D3 N/C D2 D1 GND N/C 28VIN1 0VIN1 28VIN2 0VIN2 FUNCTION Discrete Input Discrete Input Discrete Input Discrete Input Discrete Input Discrete Input Digital input Discrete Input Discrete Input Discrete Input Digital input Digital input Digital input Power Tri-state output Tri-state output Tri-state output Tri-state output Tri-state output Discrete Input Discrete Input Tri-state output Tri-state output Tri-state output Power Discrete Input Discrete Input Discrete Input Discrete Input DESCRIPTION 28 Volt / Open sensing input, channel 3 Open / Ground sensing input, channel 3 28 Volt / Open sensing input, channel 4 Open / Ground sensing input, channel 4 28 Volt / Open sensing input, channel 5 Open / Ground sensing input, channel 5 28 Volt / Open sensing input, channel 6 Open / Ground sensing input, channel 6 28 Volt / Open sensing input, channel 7 Open / Ground sensing input, channel 7 Output Enable. D1-D8 are high-impedance if OE is high Chip Enable. D1-D8 are high-impedance if CE is high When A0 is high D1 - D8 outputs data from 28V comparators When A0 is low D1 - D8 show results from 0V comparators Positive supply voltage 5.0 V Logic output, channel 8 Logic output, channel 7 Logic output, channel 6 Logic output, channel 5 Logic output, channel 4 28 Volt / Open sensing input, channel 8 Open / Ground sensing input, channel 8 Not connected Logic output, channel 3 Not connected Logic output, channel 2 Logic output, channel 1 Ground Not connected 28 Volt / Open sensing input, channel 1 Open / Ground sensing input, channel 1 28 Volt / Open sensing input, channel 2 Open / Ground sensing input, channel 2 HOLT INTEGRATED CIRCUITS 2 HI-8422 BLOCK DIAGRAM VDD OE CE 3.6V Reference 28VIN1 66 K 29 K 66 K 29 K 66 K 29 K + + + + - 28VIN2 28VIN3 28VIN4 66 K 29 K 66 K 29 K 66 K 29 K 66 K 29 K 66 K 29 K + + + + 8 x 2:1 MUX VDD D1 28VIN5 D2 28VIN6 D3 28VIN7 D4 28VIN8 D5 0VIN1 5K 9K + 9K D6 0VIN2 5K + - D7 0VIN3 5K 9K + 9K D8 0VIN4 5K + - 0VIN5 5K 9K + - 0VIN6 5K 9K + - 0VIN7 5K 9K + - 0VIN8 GND 5K 9K + - 9K 5K 3.25V Reference A0 HOLT INTEGRATED CIRCUITS 3 HI-8422 ABSOLUTE MAXIMUM RATINGS Supply voltage (VDD) Logic input voltage range Discrete input voltage range Power dissipation at 25C Solder Temperature Storage Temperature -0.3 V to +7 V -0.3 V to +5.5 V -80 V to + 80 V 350 mW 275C for 10 sec -65C to +150C RECOMMENDED OPERATING CONDITIONS Supply Voltage VDD .................................. 4.5 V to 5.5 V Operating Temperature Range Industrial Screening ......... Hi-Temp Screening ........ -40C to +85C -55C to +125C NOTE: Stresses above absolute maximum ratings or outside recommended operating conditions may cause permanent damage to the device. These are stress ratings only. Operation at the limits is not recommended. ELECTRICAL CHARACTERISTICS VDD = 5.0V 10%, GND = 0V, TA = Operating Temperature Range (unless otherwise specified). PARAMETER 28 V / OPEN DISCRETE INPUTS Open state input voltage 28 V state input voltage Open state input current 28 V state input current Input resistance Input current at 28 V OPEN / GROUND DISCRETE INPUTS Ground state input voltage Open state input voltage Ground state input resistor Open state input resistor Input source current Reverse leakage current LOGIC INPUTS (CE, OE) Input Voltage Input current OUTPUTS Logic output voltage Logic output voltage (CMOS) Tri-state output current SUPPLY CURRENT VDD current SWITCHING CHARACTERISTICS Propagation delay Output enable time Output disable time A0 Set-up time A0 Hold time IN to OUT High Low High Low Input voltage HI Input voltage LO Input sink Input source SYMBOL VSO VS28 ISO IS28 RIN IIN28 VSG VSO RIG RIO IIO IIR CONDITION Input voltage to give high output Input voltage to give low output Maximum input current to give high output Minimum input current to give low output 0 V < VIN < 16 V VIN = 28 V Input voltage to give high output Input voltage to give low output Resistor from input to ground to give high output Resistor from input to ground to give low output Current sourced into 100W to ground VIN = 35 V, VDD = 0 V MIN -5 14 TYP MAX 10 UNITS V V 84 197 71 119 394 3.0 3.5 0 100 -100 -330 5.0 100 A A KW A V V W KW A mA VIH VIL IIH IIL VOH VOL VOH VOL IOZ VIH = VDD VIL = 0 V IOH = -5 mA IOL = 5 mA IOH = -100 uA IOL = 100 uA VOUT = 0 V or VDD 2.0 0.8 1.0 -1.0 2.4 0.4 VDD - 0.2 0.2 10 V V A A V V V V A IDD VIN = 0 V (28V inputs) VIN = VDD (other inputs) 10 20 mA tLH, tHL tZL, tZH tLZ, tHZ tSU tHOLD From CE or OE From CE or OE 0 0 500 25 25 ns ns ns ns ns HOLT INTEGRATED CIRCUITS 4 HI-8422 TIMING DIAGRAMS A0 tSU tHOLD INx tHL tLH CE or OE tZL, tZH tZL, tZH Dx Dx Output Enable Timing Input to Output Propagation Delay ORDERING INFORMATION PART NUMBER HI-8422PQI HI-8422PQT PACKAGE DESCRIPTION 32 PIN PLASTIC QUAD FLATPACK (PQFP) 32 PIN PLASTIC QUAD FLATPACK (PQFP) TEMPERATURE RANGE -40C TO +85C -55C TO +125C PROCESS FLOW I T BURN IN NO NO LEAD FINISH SOLDER SOLDER HOLT INTEGRATED CIRCUITS 5 PACKAGE DIMENSIONS inches (millimeters) 32 PIN PLASTIC THIN QUAD FLAT PACK (TQFP) Package Type: 32PTQS .00057 .00022 (0.0145 .0055) .0315 BSC (0.80 BSC) .0148 .0030 (0.375 .075) .0236 .0059 (0.60 .15) .3543 BSC SQ. (9.00 BSC) .2755 BSC SQ. (7.00 BSC) .0551 .002 (1.4 .05) See Detail A .063 MAX. (1.60 MAX.) .0039 .002 (0.10 .05) .0031 R MIN. (0.08 R MIN.) .0055R .0024 (0.14R .06) 0 Q 7 Detail A HOLT INTEGRATED CIRCUITS 6 |
Price & Availability of HI-8422PQT
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |